This large Skutt oval features high-quality top and side firing elements and the famed GlassMaster controller. Lid and slabs can be reversed, virtually doubling the life of your kiln. Firing Chamber: 41-1/2” x 24-1/2” x 13-1/2” deep. 305 lbs. Overall size 53” x 34” x 19”. Requires 3 shelves. 2-year manufacturer warranty. Pickup or truck shipment - call for freight quote.

Skutt now offers a new spring assisted lid lifter for the GM1414 Oval kiln. It is an optional upgrade that can be ordered with a new kiln or, as a retrofit kit for an existing kiln. The lid braces have been redesigned with a unique cam system to prevent catching. The 3-position lid prop has 2 venting positions and a lock position. The spring assist not only helps to lift the extremely heavy GM1414 lid, it also puts less stress on the lid so it will last longer.

Eliminate Back Strain with New Spring-Assisted Lid Lifter!
Lift this revolutionary lid with just one finger, to 3 positions (2 venting and 1 lock position), using the spring-assisted lid lifter. Innovative lid lifter will not only save strain on your back, but will also put less stress on the lid and springs, prolonging the life of your kiln! The unique cam system prevents catching when opening (see image below).

Achieve Professional Results with the Easy to Use GlassMaster Controller
Designed by listening to glass artists, this controller is extremely easy to program and use. The logical layout and brilliant mix of factory-programmed options with complete custom programming capabilities makes this an ideal controller choice for both beginners and expert users.

3-Position Lid Prop 2 venting positions

Unique cam system prevents catching when opening.

Spring helps opening very heavy lid

• GlassMaster Controller
• Spring-assisted lid lifting system
• Lid- and side-fired elements
• Measures 41.5 x 24.5 x 13.5 inches
• Oval design on 8 inch stand
• 240 volts
• Encapsulated Type K thermocouple
• Reversible lid and slabs, doubling kiln life

Factory installed programs include easy commands for fusing, slumping, tack fusing and annealing. Design and store up to 6 custom programs with up to 16 segments consisting of temperature, heating or cooling rate, and a hold time (if desired). It’s easy to load and review saved programs, and the controller will even allow you to make adjustments during a firing without any interruption.