| | 

MOLDS
Custom Sink Mold and the new Contemporary Sink Mold
Fusion Headquarters offers you two glass sink shapes to choose from, Our original Custom Sink Mold and the new Contemporary Sink Mold.

The trick to getting good commercial grade sink molds is to put in the time working with contractors, glass artists and metal spinners to get unique shapes that are both functional and aesthetically pleasing. Both of our sink molds accommodate up to a 22” blank, have smooth transitioned sides for a beautiful shape, a gently flared lip to help keep your glass on center when slumping, a good bottom curvature so they drain properly and are made from durable 18 gauge 300 series stainless steel. We didn't just adapt this mold from a bowl or a wok, instead we developed a shape that will please not only the custom designers but the building inspector as well.


Choose a mold
Contemporary Design 22: Sink Mold
Custom Designed 22" Sink Mold

Our original Custom Sink Mold produces a wider, shallower finished sink. It has slightly flattened bottom radius. This mold has a 22" diameter
and 7-½" tall and a 22” diameter blank produces
a sink that is approximately 17" in diameter and
5" tall. To make the glass blank for the sink you
can either fuse your own slab or use our
specially designed Stainless Steel Casting
Ring (CASRIN).

Order #SINKMOL
Additional shipping cost: $13.50
$145.00
Sale Price $119.95

Contemporary Design 22" Sink Mold

Our new Contemporary Sink Mold has a stylish deeper profile, narrower in the lower third with a rounder bottom. The mold is also 22” in diameter and is 7-¼” tall. In this mold a 22” blank will net a vessel that is approximately 17-3/8” in diameter and 6-3/8” tall. These molds are not limited to only making sinks. They are also great for bending smaller pieces of glass. To make the glass blank for the sink you can either fuse your own slab or use our specially designed Stainless Steel Casting Ring (CASRIN).

OUT OF STOCK

The Contemporary Sink Mold is great for both sinks and other bowl forms (serving bowls, lamp shade, table art) such as the heavily textured glass bowl shown in the center of the photo. Notice how the metal mold is sitting on a ring. Because the mold has a round bottom, the ring (Stainless Steel Mold Stand (MOLSTA) is used in the kiln to keep the mold level and on center.
Stainless Steel Casting Ring

Stainless Steel Casting Ring

Made from 300 series stainless steel, this 20” diameter x 2½” tall ring fits nicely on a 21” round kiln shelf and is butt welded to eliminate seams. The ring is the ideal container form to use when casting pieces of glass together to make glass sinks. Just set the casting ring lined with ceramic fiber paper (RINPAP) on a prepared kiln shelf and fill with compatible glass. Fire to full fuse without worry, the ring will contain the molten glass allowing you to make thick glass slabs that can be slumped into glass sinks using the Fuse Master Sink Mold (SINKMOL).

Order #CASRIN
$49.95
 

Ceramic Fiber Ring Paper

Use this 61-¾” x 2-½” x 1/8” strip of ceramic fiber to line our Stainless Steel Casting Ring. It both keeps the glass from fusing to the Stainless Steel ring it prevents the ring from pinching the glass.

Order # RINPAP
$12.95 

Mold StandStainless Steel Mold Stand

This 7” diameter stainless steel ring is 1-¼” tall. It is the ideal support for round bottom molds. Place the stand in the center of the kiln and then center your molds on top of the stand.  The stand keeps the molds from rolling or moving around and it can also be used as a 7” casting ring.

Order # MOLSTA $24.95



Complete Sink Sets - SAVE 20%

Everything you need to start making glass sinks.

Each kit contains either the Custom Designed 22” Sink Mold or the Contemporary 22” Sink Mold
and includes:
- Stainless Steel Mold Stand - MOLSTA
- Stainless Steel Castingg Ring - CASRIN
- Ceramic Fiber Ring Paper - RINPAP


Custom Sink Mold Set Order # SINKSET $177.95 (Additional Shipping cost: $13.50)

Contemporary Sink Mold Set Order # CONSINKSET $177.95 (Additional Shipping cost: $13.50)
Diamond Core Drill Bit

Diamond Core Drill Bit

NOT included in the set, but darn handy to have. Here is a 1-¾” (44mm) diamond-core drill bit for drilling a drain hole in your glass sinks.

Diamond Core Drill Bit - 1-3/4”
Order# DRIBIT44 - $44.95
 

Firing Schedule for bending Bullseye 7/8" thick

      

Seg 1

Seg 2

Seg 3

Seg 4

 Seg 5

 Seg 6

Ramp Rate

200

250

250

500

9999

60

Temperature

250

500

750

1175

980

200

Soak Time

1:00

1:00

1:00

1:00

4:00

0:01
 


15500 NE Kincaid Rd.
Newberg, OR  97132
Tel 503-538-5281 · Fax 503-538-6527

Regarding problems with this Web site,
contact the Webmaster