Enamels and Paints
Enamels are a wonderful way to add lines or shading to a glass piece.
Fuse Master Enamels are finely ground glass powders (300 mesh which is much finer than powdered frit and most other enamels) with a very high color intensity. Enamels have a color density close to 50%, where frit usually has 10% or less. All the Fuse Master enamel lines are inter-mixable allowing for an infinite range of colors. This takes practice, we suggest starting with a single line.
Fuse Master Enamels
EZ Fire Enamels
High temperature, Mature at 1380F – Hold their color up to 1650F. for Bullseye, Uroboros, Spectrum and Wissmach and Window Glass.
Lead Free Low Fire Opaque
Mature at 1175F – Hold their color up to 1400F – Designer Colors – Lead Free – Easy to use. For decorative glass only! Not for food bearing surfaces.
Medium for Powdered Enamels
Mediums are what you mix with enamels to apply and adhere them to the glass before firing. Each medium works differently. Sort of like the difference between using water color, acrylic or oil paints.
- Fuse Master Water Friendly Medium – A very good middle of the road medium. Dries quickly, works with most fusing applications. Cleans up with water.
- Gum Arabic – This medium really ‘sticks’ your enamels to glass. So much so that you can actually add another color over the top before firing.
- Fuse Master Silk Screen Medium – One of the best overall mediums. It creates a smooth, creamy consistency very much like acrylic paints. Besides screen printing it is great for brushing, stippling and squeeze bottle applications. Cleans with water.
- Stamping Medium – Specifically design for rubber stamping enamels.
- Fuse Master Air Brush Medium – A thin consistency with a slight tack. Watery enough to not clog the airbrush, yet it gives the powders bonding power. Water based.
- Squeegee Oil – This thicker medium gives enamels a long working time. It has a strong odor and cleans with pain thinner or mineral spirits.