Introducing the new Fuse Master Metallic High Fire Enamel
Add brilliance to your work with this exciting new line of metallic enamels that are easy to fire and don’t require venting or mixing. Just pop them in the kiln and fire. Unlike mica, these metallic enamels do not require a top layer of clear and they don’t rub off after firing. Just mix with water and your favorite medium (we like to add a couple of drops of Water Friendly Medium to hold everything in place) and fire up to 1650F.
They can be used for full fuse firings, glass blowing and lamp working without burning out. EZ Fire Metallic Enamels are a very fine grind so they can be brushed, silkscreen printed, stippled or air brushed onto a base glass. One ounce of enamel will cover approximately 3.7 square feet of glass so they are an inexpensive alternative to sheet glass. Try them today.
Betty Lynn –
Robert Luttrell –
unlike micas what you see is almost what you get after firing